http://www.benlybenis.com/top-plate-leveling/
Top Plate Leveling
center of pressure?
An oil storage tank has a sloping side to 60 degrees to the horizontal. A circular aperture of diameter 300 mm is cut into the side of the tank and is covered by a plate screwed in place. The oil level in the tank is 1.2 m above the top of the opening of find: a) the force acting on the plate b) the depth of the center if the pressure plate below the surface of the petroleum oil has a density of 0.9 K value in D / 4 I HAVE MY RESPONSE 0.841 and 1.37, but I think this is WRNG and correct answers are 0.83 and 1.33 meters KN How do CORRECT
Aww, you're close enough.
 |
 2 Leveler Caster Wheel Hexagon Top plate leveling  US $18.78
|
 2 Leveler Caster Wheel Square Top plate leveling US $18.78
|
 2 1 2 Leveler Caster Wheel Square Top plate leveling US $24.85
|
 3 Leveler Caster Wheel Square Top plate leveling US $29.83
|
 3 Leveler Caster Wheel Hexagon Top plate leveling US $29.83
|
 2 Leveler Caster Wheel Square Top plate leveling US $18.78
|
 2 1 2 Leveler Caster Wheel Hexagon Top plate leveling US $24.85
|
Woodcraft Presents Charles Neil with the Pinnacle Router Lift
No related posts.
-
Translator
